home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.20031118-20041115 / 000314_pbertain@mac.com_Sun Jun 20 13:54:01 2004.msg < prev    next >
Internet Message Format  |  2020-01-01  |  3KB

  1. Path: newsmaster.cc.columbia.edu!newsfeed1.nycmny01.us.to.verio.net!nntp2.tagonline.com!newsfeed2.dallas1.level3.net!news.level3.com!newsfeed.mathworks.com!bigboote.WPI.EDU!logbridge.uoregon.edu!news-feed01.roc.ny.frontiernet.net!nntp.frontiernet.net!prodigy.com!prodigy.com!newsmst01a.news.prodigy.com!prodigy.com!postmaster.news.prodigy.com!newssvr29.news.prodigy.com.POSTED!ce4bfe91!not-for-mail
  2. From: Paul Bertain <pbertain@mac.com>
  3. Newsgroups: comp.protocols.kermit.misc
  4. Message-ID: <2004062009381939504%pbertain@maccom>
  5. References: <2004061909592031471%pbertain@maccom> <deb126db.0406192150.50f8a24a@posting.google.com>
  6. User-Agent: Unison/1.0.2a
  7. MIME-Version: 1.0
  8. Content-Type: text/plain; charset=ISO-8859-1; format=flowed
  9. Content-Transfer-Encoding: 8bit
  10. Subject: Re: How do I "break" a session
  11. Lines: 61
  12. NNTP-Posting-Host: 67.117.124.123
  13. X-Complaints-To: abuse@prodigy.net
  14. X-Trace: newssvr29.news.prodigy.com 1087749489 ST000 67.117.124.123 (Sun, 20 Jun 2004 12:38:09 EDT)
  15. NNTP-Posting-Date: Sun, 20 Jun 2004 12:38:09 EDT
  16. Organization: SBC http://yahoo.sbc.com
  17. X-UserInfo1: FKPGGXCDEJV[RTD[ABCD^VX@WB]^PCPDLXUNNHLHQAVTUZ]CLNTCPFK[WDXDHV[K^FCGJCJLPF_D_NCC@FUG^Q\DINVAXSLIFXYJSSCCALP@PB@\OS@BITWAH\CQZKJMMD^SJA^NXA\GVLSRBD^M_NW_F[YLVTWIGAXAQBOATKBBQRXECDFDMQ\DZFUE@\JM
  18. Date: Sun, 20 Jun 2004 16:38:09 GMT
  19. Xref: newsmaster.cc.columbia.edu comp.protocols.kermit.misc:15047
  20.  
  21. Ah... the old "Read the directions" trick.  I love it when people don't 
  22. read; unfortunately, it was me.
  23.  
  24. Thanks for the help (in pointing out the obvious).
  25.  
  26. Paul
  27.  
  28.  
  29. On 2004-06-19 22:50:17 -0700, slash_dev_slash_null_2000@yahoo.com (Mark 
  30. Sapiro) said:
  31.  
  32. > Paul Bertain <pbertain@mac.com> wrote in message 
  33. > news:<2004061909592031471%pbertain@maccom>...
  34. >> 
  35. >> Now I when I am done with my session, I would like to return to Kermit 
  36. >> but I cannot figure out the break sequence.
  37. >> 
  38. >> I don't mind just closing the terminal window but I would prefer to 
  39. >> return to Kermit and exit gracefully.
  40. >> 
  41. >> I tried <CTRL>+"\" and <CTRL>+Just about every other key.  I also tried 
  42. >> <CTRL>+<SHIFT>+Some other sequences.
  43. >> 
  44. >> I figure I must be either missing the obvious or not setting a 
  45. >> preference from within Kermit (set escape-character ???).
  46. > Normally, when a session terminates the remote device closes the
  47. > connection. When Kermit detects this via protocol or via loss of
  48. > carrier on a serial port, it returns to command mode.
  49. > If you want to return to command mode while the connection either is
  50. > or appears to be still open, the Kermit escape character must be
  51. > enabled (this is the default), and you type the escape character and
  52. > then type the letter C. Kermit tells you this when you first connect
  53. > with a message that looks like
  54. >    Escape character: Ctrl-\ (ASCII 28, FS): enabled
  55. >   Type the escape character followed by C to get back,
  56. >   or followed by ? to see other options.
  57. >   If the escape character is disabled (must have been done in an
  58. > initialization file), you can enable it before connecting with
  59. >   set terminal escape-character enabled
  60. > If you escape back to a command prompt and then exit Kermit, you will
  61. > get a warning that a connection may still be open. You can avoid this
  62. > by first issuing
  63. >   close connection
  64. > or by
  65. >   set exit warning off
  66. > See
  67. >   help set terminal
  68. >   help close
  69. >   help set exit
  70. >   help set carrier-watch
  71.  
  72.